NANO Rim sealant + Cleaner Sealing Alloy wheels waterproof high quality Germany
Nano-Wheel Sealant Set:
Provides a long term protection from road grime, salt and other aggressive in uences. It helps to prevent baked on brake dust. The sealant is suitable for all varnished wheels.
Content: 200 ml Wheel Cleaner 150 ml Sealant
Product properties: car and motorcycle wheels, off-road, bicycle and classic wheels
Area of application: Nano Wheel Rim Cleaner Shake well before use! Always test on an inconspicuous area. Spray the cleaner evenly onto surface and allow to penetrate for a few minutes (depending on degree of contamination). Afterwards rinse with plenty of water.
Important: Do not use on hot surfaces. The cleaner must not be allowed to dry on the surface. Nano Wheel Rim Sealant Shake well before use! Surface preparation: The surface has to be completely clean, dry and free of grease. Sealing: Always test on an inconspicuous area. Spray the sealant evenly onto the surface (approx 30-40 ml per wheel, spray 2-3 times). Allow the sealant to penetrate for approx 1 minute. Afterwards polish the surface with a soft cloth. The sealed parts may not be cleaned mechanically or chemically for 2 hours at least. Do not apply at temperatures below 5 °C or above 30 °C. 150 ml (for 4 wheels at least).
Youtube link: https://youtu.be/c-1bdNEFBaQ
Application Consumption 1 set for up to 4 rims
Technical data Wheel Cleaner Physical state: liquid Colour: red Odour: mild pH-Value (at 68 °F): 1,2 Melting point: < 0 °C Initial boiling point and boiling range: > 80 °C Flashpoint: > 100 °C Ignition temperature: > 200 °C Density at 68 °F: 1,0 - 1,1 g/cm³ Water soluble Physical state: liquid Colour: clear/colourless Odour: alcoholic Initial boiling point and boiling range: 82 °C Flashpoint: < 21 °C (DIN 51755) Lower explosion limit: 2 Vol.-% Upper explosion limit: 12 Vol.-% Technical data Wheel Sealant Ignition temperature: 425 °C (DIN 51794) Vapour pressure (at 68 °F): 42 hPa Water solubility: miscible